C63000
Home > C63000
C63000
Spec Equivalents: AMS 4640, SAE J463, QQ-C-465B, ASME SB150, ASTM B-150, B-124, B-171, B-283
C63000 (AMS 4640 – CDA 630) Nickel Aluminum Bronze alloy is an excellent choice for applications involving heavy loads, abrasive wear resistant, friction, abrasive wear and corrosion. The addition of nickel increases the strength of alloy without effecting its excellent ductility, toughness and corrosion resistance. Typical applications for C63000 nickel aluminum bronze included aircraft landing gear components, strut bearings, main pistons, trunnion bearings and similar vital components.
Typical Uses :
- Industrial: Hydraulic Bushings for Earth Moving Equipment, Corrosion Resistant Articles, Bushings, Bearings, Heat Exchanger Flanges, Heat Exchanger Headers, Tanks, Valve Balls, Structural Members, Pump Shafts, Aircraft Parts, Valve Guides, Plunger Tips, Welded Piping Systems, Balls, Gears, Cams, Pump Parts, Shafting, Condenser Tube for Power Stations and Desalting Units, Valve Seats
- Marine : Pump Parts, Bolts, Nuts, Propellers, Ship Propellers
- Plumbing : Faucets
CHEMICAL COMPOSITION
| Al | Cu | Fe | Mn | Ni | Si | Sn | Zn | |
| Min/Max | 9.0 – 11.0 | Rem | 2.0 – 4.0 | 1.5 | 4.0 – 5.5 | 0.25 | 0.2 | 0.3 |
| Nominals | 10 | 82 | 3 | – | 5 | – | – | – |
Fabrication
| Joining Technique | Suitability |
| Brazing | Fair |
| Butt Weld | Good |
| Capacity for Being Cold Worked | Poor |
| Capacity for Being Hot Formed | Good |
| Coated Metal Arc Welding | Good |
| Forgeability Rating | 75 |
| Gas Sheilded Arc Welding | Good |
| Machinability rating | 30 |
| Oxyacetylene Welding | Not recommended |
| Seam Weld | Good |
| Soldering | Not recommended |
| Spot Weld | Good |
Physical Properties
| Product Property | US Customary | Metric |
|
Coefficient of Thermal Expansion |
9.0 ·10-6 per oF (68-572 F) | 16.2 · 10 6? per °C (20-300 C) |
| Density | 0.274 lb/in3 @ 68 F | 7.58 gm/cm3 @ 20 C |
| Electrical Conductivity | 7 %IACS @ 68 F | 0.041 MegaSiemens/cm @ 20 C |
| Electrical Resistivity | 116.0 ohms-cmil/ft @ 68 F | 19.28 microhm-cm @ 20 C |
| Melting Point Liquid US | 1930 F | 1054 C |
| Melting Point Solid US | 1895 F | 1035 C |
Sizes Available
| ROUND RODS | 8mm To 70 mm |
| HEX | 10mm To 60mm |
| SQUARE | 10mm To 60mm |
| FLAT | 10mm Min Thickness and max Width 120mm |
| BILLETS | Up to 200 mm |
| INGOTS | As per Specification |
C63000
Spec Equivalents: AMS 4640, SAE J463, QQ-C-465B, ASME SB150, ASTM B-150, B-124, B-171, B-283
C63000 (AMS 4640 – CDA 630) Nickel Aluminum Bronze alloy is an excellent choice for applications involving heavy loads, abrasive wear resistant, friction, abrasive wear and corrosion. The addition of nickel increases the strength of alloy without effecting its excellent ductility, toughness and corrosion resistance. Typical applications for C63000 nickel aluminum bronze included aircraft landing gear components, strut bearings, main pistons, trunnion bearings and similar vital components.
Typical Uses :
- Industrial: Hydraulic Bushings for Earth Moving Equipment, Corrosion Resistant Articles, Bushings, Bearings, Heat Exchanger Flanges, Heat Exchanger Headers, Tanks, Valve Balls, Structural Members, Pump Shafts, Aircraft Parts, Valve Guides, Plunger Tips, Welded Piping Systems, Balls, Gears, Cams, Pump Parts, Shafting, Condenser Tube for Power Stations and Desalting Units, Valve Seats
- Marine : Pump Parts, Bolts, Nuts, Propellers, Ship Propellers
- Plumbing : Faucets
CHEMICAL COMPOSITION
| Al | Cu | Fe | Mn | Ni | Si | Sn | Zn | |
| Min/Max | 9.0 – 11.0 | Rem | 2.0 – 4.0 | 1.5 | 4.0 – 5.5 | 0.25 | 0.2 | 0.3 |
| Nominals | 10 | 82 | 3 | – | 5 | – | – | – |
Fabrication
| Joining Technique | Suitability |
| Brazing | Fair |
| Butt Weld | Good |
| Capacity for Being Cold Worked | Poor |
| Capacity for Being Hot Formed | Good |
| Coated Metal Arc Welding | Good |
| Forgeability Rating | 75 |
| Gas Sheilded Arc Welding | Good |
| Machinability rating | 30 |
| Oxyacetylene Welding | Not recommended |
| Seam Weld | Good |
| Soldering | Not recommended |
| Spot Weld | Good |
Physical Properties
| Product Property | US Customary | Metric |
|
Coefficient of Thermal Expansion |
9.0 ·10-6 per oF (68-572 F) | 16.2 · 10 6? per °C (20-300 C) |
| Density | 0.274 lb/in3 @ 68 F | 7.58 gm/cm3 @ 20 C |
| Electrical Conductivity | 7 %IACS @ 68 F | 0.041 MegaSiemens/cm @ 20 C |
| Electrical Resistivity | 116.0 ohms-cmil/ft @ 68 F | 19.28 microhm-cm @ 20 C |
| Melting Point Liquid US | 1930 F | 1054 C |
| Melting Point Solid US | 1895 F | 1035 C |
Sizes Available
| ROUND RODS | 8mm To 70 mm |
| HEX | 10mm To 60mm |
| SQUARE | 10mm To 60mm |
| FLAT | 10mm Min Thickness and max Width 120mm |
| BILLETS | Up to 200 mm |
| INGOTS | As per Specification |